Folding Table 20510
The folding tables of the 20510 series can be ordered in different formats, colors and decorsTable height:730 mm Frame:Stabel 4-legged frame with adjustable glides, chrome-plated or powder-coated, round tube profile 30 mm diameterTabletop:Chipboard 19 mm thick, edges widened to 70 mm, unicolored Thermopal laminate surface (HPL), underside HPL backing, solid edge 70 x 6 mm (beech) - solid wood banding rounded at the top and bottom, natural vanished Surface in various decors and edge shapes to choose from
Folding Table 20515
The folding tables of the 20515 series can be ordered in different formats, colours and decorsTable height:730 mmFrame: Stable T-foot frame made of 30 mm chrome-plated tubular steel with plastic glidesTabletop:Tabletop made of 28 mm quality chipboard,top side HPL according to house collection, underside HPL bacl layer, edge (B) 30 mm solid beech edgerounded top and bottom, natural vanished Surface in various decors to choose from
Stand-Up Table 20553
The stand-up tables of the 20553 series can be ordered in different formats, colours and decorsTable height:1100 mmFrame: Round tube 35 mm, with frame 40 x 20 mm coated or chrome platedTabletop:20 mm thick with ABS safety edge, Thermopal laminate surface (HPL), selection of different decors available
Folding Table 20511
The folding tables of the 2051 series can be ordered in different formats, colors and decorsTable height:730 mmFrame:Stable T-Foot frame, powder-coated, square tube columns 40 x 25 x 2 mm, square tube sled base 40 x 20 x 2 mm, runners made from 40 x 20 x 2 mm square tube, welded to prevent vandalism,solvent-free, decidedly powder-coatedPowder coating available in different colorsTabletop:Tabletop 19 mm chipboard made of natural wood reinforced with 70 mm edge, understanding direct thermo-pale covering (HPL), underside HPL bak layer, solid edge 70 x 6 mm (beech) - solid wood banding rounded and rounded below, natural vanishedDifference in different decors to choose from
Folding Table 20514
Table height:730 mmFrame:Stable double column round tube frame 30 x 2 mm with adjustable glides, extension 35 mm, welded vandal-proofEither chrome-plated or powder-coatedTabletop:Tabletop 19 mm chipboard reinforced with 70 mm edge, top surface thermopal covering (HPL), underside HPL back layer, solid edge 70 x 6 mm (beech) - solid wood banding rounded at the top and bottom, natural vanishedSurface in various decors to choose fromProduct information:The folding tables of the 20514 series can be ordered in different formats, colors and decors
Writing desk REISS-Touch AVARO Q, Frame White
With one swipe to more ergonomics<?xml:namespace prefix = "o" ns = "urn:schemas-microsoft-com:office:office" />Sit-stand desks are essential for an ergonomic workplace. With REISS Touch, height adjustment and the health-promoting change between sitting and standing work take on a whole new dimension. The modern way of height adjustment for stand-sit desks is based on the use of the smartphone – one swipe and you set up your desk at the optimal working height while sitting, standing or for a short meeting.Switchless height adjustment with REISS-Touch wear-free and button-free sensorREISS Touch is a switchless height adjustment with an intuitive, wear-free and button-free sensor for the REISS Avaro Q stand-sit tables.REISS Touch is based on the use of the smartphone. The sensor for raising or lowering the table is activated with a swipe. By simply touching the control panel, it can then be adjusted to the optimal working height while sitting or standing. The control panel is marked with a sticker with operating instructions. The sensor itself is mounted almost invisibly below the table top. There is no control panel, buttons or other wearing parts protruding from the table top. REISS Touch received the Plus X Award in the categories of high quality, design, ease of use, functionality and ergonomics.Motorized steplessly height adjustable from 650 - 1250 mm, height adjustment according to DIN EN 527-1- Adjustment speed 38 mm/sek.- Noise level < 50 dB (A)- Power consumption in standby 0,1 WGS-certified, quick motor adjustment (CE-marked), load capacity max. 100 kg, Security through piezo sensor with sensitive driveway protectionEquipped with two cable bushings 80 mm in diameter and spacious horizontal cable duct, can be variably folded inwards or outwards, can be installed without tools. Electrification according to the “guideline for electrical installation in office furniture”.Table top three-layer chipboard E 1, 25 mm thick, according to DIN EN 14322, made of natural wood, made without chloride hardener. The melamine resin coating is antistatic, lightfast and low-reflection, heat-resistant, scratch-, shock- and abrasion-resistant. The surfaces can be cleaned with common household cleaning agents. The cleaning agents must not contain any abrasive, abrasive or acidic components. All-round, impact-resistant, rounded plastic edge (ABS).Square column profile (70 x 70 mm), with foot extensions in an attractive design, without crossbars. Floor leveling screws with metal thread and floor-protecting plates, adjustable without tools. Frames made of precision steel tubing, solvent-free, environmentally friendly powder-coated, no composite materials, therefore fully recyclable.
Writing desk REISS-Touch AVARO Q, Frame Anthracite
With one swipe to more ergonomics <?xml:namespace prefix = "o" ns = "urn:schemas-microsoft-com:office:office" />Sit-stand desks are essential for an ergonomic workplace. With REISS Touch, height adjustment and the health-promoting change between sitting and standing work take on a whole new dimension. The modern way of height adjustment for stand-sit desks is based on the use of the smartphone – one swipe and you set up your desk at the optimal working height while sitting, standing or for a short meeting.Switchless height adjustment with REISS-Touch wear-free and button-free sensorREISS Touch is a switchless height adjustment with an intuitive, wear-free and button-free sensor for the REISS Avaro Q stand-sit tables.REISS Touch is based on the use of the smartphone. The sensor for raising or lowering the table is activated with a swipe. By simply touching the control panel, it can then be adjusted to the optimal working height while sitting or standing. The control panel is marked with a sticker with operating instructions. The sensor itself is mounted almost invisibly below the table top. There is no control panel, buttons or other wearing parts protruding from the table top. REISS Touch received the Plus X Award in the categories of high quality, design, ease of use, functionality and ergonomics.Motorized steplessly height adjustable from 650 - 1250 mm, height adjustment according to DIN EN 527-1 - Adjustment speed 38 mm/sek.- Noise level < 50 dB (A)- Power consumption in standby 0,1 WGS-certified, quick motor adjustment (CE-marked), load capacity max. 100 kg, Security through piezo sensor with sensitive driveway protection Equipped with two cable bushings 80 mm in diameter and spacious horizontal cable duct, can be variably folded inwards or outwards, can be installed without tools. Electrification according to the “guideline for electrical installation in office furniture”. Table top three-layer chipboard E 1, 25 mm thick, according to DIN EN 14322, made of natural wood, made without chloride hardener. The melamine resin coating is antistatic, lightfast and low-reflection, heat-resistant, scratch-, shock- and abrasion-resistant. The surfaces can be cleaned with common household cleaning agents. The cleaning agents must not contain any abrasive, abrasive or acidic components. All-round, impact-resistant, rounded plastic edge (ABS). Square column profile (70 x 70 mm), with foot extensions in an attractive design, without crossbars. Floor leveling screws with metal thread and floor-protecting plates, adjustable without tools. Frames made of precision steel tubing, solvent-free, environmentally friendly powder-coated, no composite materials, therefore fully recyclable.
